Min.: 78 mm
(3.071 in)
Additional information pertaining to the Vantage Vx SMART Controller:
1. Limited by charger, ensure that load does not prevent battery from fully charging.
Continuous current draw should ideally be less than 500mA but must not exceed 1A.
2. Operators connected, no ancillaries fitted
Warnings and Limitations on the Vx SMART Controller:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Centurion Vantage Vx SMART Controller and Charger
1 x Vx SMART Wall Box
2 x Centurion Nova 4 Button Remotes
Technical Specifications | D3 SMART | |
---|---|---|
Input voltage(1) | 110V - 240V AC 50/60Hz (1) | |
Current consumption (mains) | 320mA peak | |
Dx12V Battery charger current output | 1.8A @ 14.3V +/- 5% (28W) | |
Maximum number of operations per day | 20 (3,6) | |
Duty cycle - Mains present (2,3) | 25% | |
Motor power supply | Battery-driven (Standard Capacity - 1x12V) | |
Current consumption (motor at rated load) | 11A |
This equipment is compliant with the radiated emissions requirements of EN 55032 / CISPR 32 for Class B devices, which intends to offer adequate protection to broadcast services within the residential environment.
Technical Specifications Continued | D3 SMART | |
---|---|---|
Fuse Protection | Type | Rating | |
Main Control Card | Serviceable | 35A | |
Aux. Supply | Resetable Fuse | 12V 300mA MAX (10sec Pulse) | |
Charger (Mains Supply) | Non-serviceable | 3A slow-blow | |
Motor push force - starting | 18kgf | |
Motor push force - rated | 12kgf | |
Gate mass - maximum | 300kg | |
Gate speed (varies with load) (4) | Maximum: Up to 24m/min Rated: Up to 21m/min | |
Manual Override | Lockable with key release | |
Operations whilst in Battery backup mode with 7.2Ah Battery | Operating Mode | |
Up to 24m/min 7kgf | Up to 24m/min 12kgf | ||
Half day (5,6,8) | 90 | 80 | |
Full day (5,6,8) | 70 | 65 | |
Collision Sensing | Electronic | |
Operating temperature range | -15°C to +50°C | |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete | |
Receiver code storage capacity | 32 Remotes (7) | |
Receiver frequency | 433.92MHz | |
Degree of protection | IP55 | |
Mass of unit packed (with standard kit, but excl. Rack and Battery) | 6.7kg | |
Packaging dimensions (with standard kit, but excl. Rack and Battery) | 325mm wide x 245mm deep x 395mm high |
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase Battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
8. Dependant on the type and condition of the Battery
(Kit Includes : Operator, Controller, 12V Charger, (CP4C2) 7.2Ah Battery, 4m Steel Rack and 2 x 4 Button NOVA Txs. – Excludes Foundation Plate)
The SECTOR II 3m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.
This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.
A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.
The Sector II 3m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.
This Kit Includes
The SECTOR II 4.5m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.
This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.
A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.
The Sector II 4.5m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.
This Kit Includes
Weight | 14 kg |
---|---|
Dimensions | 35 × 29 × 47 cm |
DESCRIPTION | SECTOR 3 | SECTOR 4 | SECTOR 6 | |
---|---|---|---|---|
Input Voltage | 220 - 240V AC +\- 10% @ 50Hz | 220 - 240V AC +\- 10% @ 50Hz | 220 - 240V AC +\- 10% @ 50Hz | |
Motor Voltage | 12V DC | 12V DC | 12V DC | |
Motor Power Supply | Battery-driven 1 - 2A Charger | Battery-driven 1 - 2A Charger | Battery-driven 1 - 2A Charger | |
Boom Pole Length | 3.0m | 4.5m | 6.0m | |
Boom Pole Raise Time | 1.2 sec | 3 sec | 3 sec | |
Daily Operations - Max | 3000 | 3000 | 3000 | |
Duty Cycle - Mains Present | 100% 2 | 100% 2 | 100% 2 | |
Housing Specification 3 | Inland - Zinc-passivated mild steel Coastal plains - Grade 430 Stainless Steel with Epoxy Coating Marine - Grade 316 Brushed Stainless Steel | Inland - Zinc-passivated mild steel Coastal plains - Grade 430 Stainless Steel with Epoxy Coating Marine - Grade 316 Brushed Stainless Steel | Inland - Zinc-passivated mild steel Coastal plains - Grade 430 Stainless Steel with Epoxy Coating Marine - Grade 316 Brushed Stainless Steel | |
Barrier Pole Specification | Aluminium, Round Profile, Epoxy-coated White, Red Reflective Tape | Aluminium, Round Profile, Epoxy-coated White, Red Reflective Tape | Aluminium, Round Profile, Epoxy-coated White, Red Reflective Tape | |
Onboard Receiver Specification | CENTSYS code-hopping, multichannel, 433MHz, with 500 remote control button storage capacity | CENTSYS code-hopping, multichannel, 433MHz, with 500 remote control button storage capacity | CENTSYS code-hopping, multichannel, 433MHz, with 500 remote control button storage capacity |
excludes Foundation Plate, Batteries & Rack
We use cookies to improve user experience, and analyze website traffic. For these reasons, we may share your site usage data with our analytics partners. By continuing to the site, you consent to store on your device all the technologies described in our cookie policy. Here is the the cookie policy