Mounts above road surface
12VDC input voltage
Anti-corrosion chassis – hot dip galvanised mild steel
85mm mild steel, electroplated and powder coated spikes
On-board receiver
Supports output for robot interface
All moving parts

The SECTOR II 3m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.

This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.

A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.

The Sector II 3m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution. 

Features

• High-volume capability
• Battery backup
• Smooth, intelligent speed control

This Kit Includes

• Operator – 430 Stainless steel (Epoxy Coated)
• Controller
• 2A SM Charger
• 7.2 Ah Battery
• 3m Boom Pole

This equipment is compliant with the radiated emissions requirements of EN 55032 / CISPR 32 for Class B devices, which intends to offer adequate protection to broadcast services within the residential environment.

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase Battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
8. Dependant on the type and condition of the Battery

The SECTOR II 6m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.

This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.

A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.

The Sector II 6m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.

Features:

• High-volume capability
• Battery backup
• Smooth, intelligent speed control

This Kit Includes

• Operator – 430 Stainless steel (Epoxy Coated)
• Controller
• 2A SM Charger
• 7.2 Ah Battery
• 6m Boom Pole

RAZ Rack is designed for sliding gates weighing up to 500kg and offers unparalleled durability and ease of installation ensuring your gate functions smoothly and silently.

• Rack Type: Interlocking
• Material: High-Durability Nylon
• Rack Dimensions: (L) 500mm x (W) 30mm x (H) 53mm
• Packaging Dimensions: (L) 550mm  x (W) 120mm  x  (H) 95mm
• Warranty: Manufacturer’s Carry-In Product Warranty

• To be used for LED Installation Assembly kit (NO LED)
• To be used with Sector 2 LED Coil Strips 10mm x 4.2m
• To be used with Sector 2 LED Coil Strips 10mm x 5 7m
• To be used with Sector 2 LED Coil Strips 10mm x 2.7m
• Need to either add GA80-2 Depending on Boom pole length
• Need to either add GA80-3 Depending on Boom pole length
• Need to either add GA80-4 Depending on Boom pole length

Base for loop detector connection

11 Pin relay base plug suitable for Loop Detectors LD 100,102,200,202

Technical Specifications   

• Input voltage 110V - 240V AC 50/60Hz
• Current consumption (mains) 320mA peak
• DX 12V Battery charger current output 1.8A @ 14.3V +/- 5% (28W)
• Maximum number of operations per day 20
• Duty cycle - Mains present 25%
• Motor power supply    Battery-driven (Standard Capacity - 1x12V)
• Current consumption (motor at rated load)  11A
• Receiver code storage capacity 32 Remotes
• Mass of unit packed (with standard kit, but excl. Rack and Battery) 6.7kg

Kit Includes

• Operator
• DX Controller
  
• Charger
• 2 x 4 Button NOVA Remote Transmitters
• 4m RAZ Rack
• Excludes Foundation Plate

Centurion Cable Vector2 2 Core X 2.0mm, 4 Core X 0.5mm, Screened Per 25m Roll for R821.35

• Mains: 220V - 240V AC 50Hz
• Motor Voltage: 12V DC
• Max. Output Torque: 390 Nm
• Max. Duty Cycle with Main & Battery Back up: Single Swing 250 Doubl
• Motor Weight: 15Kg
• Typical Gate Operating Time: 15s

Centurion Swing R6 Drive Arm Assembly 400mm

This Centurion D5 Evo Smart & D3 Smart Anti Theft Cage including fitted padlock has been designed specifically to fit the D5 Evo Smart & D3 Smart Gate Motors only.

Technical Specifications:

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

Centurion Swing Accessory R6 Drive Arm Assembly 500mm

Rapid openingLots of vehicles coming in and out? You need something that goes up and down. Fast! The Centurion SECTOR II is ideal for high-volume traffic control applications and puts a manically ticking metronome to shame - raising a three metre pole in under 1.2 seconds and lowering it just as quickly.
Battery backupWith our 12V battery driven motor, your security is never compromised. The CENTURION SECTOR II will continue to stay on, even when the power is off - beating up and down 3000 times during a 24 hour power failure before it needs a recharge. If you're expecting no power for a while, the built-in mains failure detection can be set to keep the barrier raised under power failure conditions.
High-torque boom pole operationThe Centurion SECTOR II's DC motor and reduction gearbox generate enough torque to make sure that your boom goes up and down forever and ever. Come sunshine, rain or howling winds, you'll always be able to get in and out.
Safe sensitivity for boom pole loweringYour boom won't go BOOM on top of a visitor's car. The Centurion SECTOR II will detect any obstruction, so you're safe - and won't have to fill in any of those pesky insurance forms.
Robust, durable and slimline operator casingOur slim Centurion SECTOR II looks particularly fetching - and epoxy-coating, in a highly visible 'traffic yellow', keeps it safe from drivers with terrible eyesight. Available with different levels of corrosion protection for inland, coastal plains, and marine environments.
Easy access to electronicsIt's so easy and comfortable to set up the Centurion SECTOR II's many advanced features thanks to the clever, ergonomic design of the housing, with the electronic assembly at the top of the operator at the perfect working height.
When size mattersWhether closing off an entrance from as narrow as three metres to as wide as six metres, there is a SECTOR II model to suit. Fit the optional jack-knife and your SECTOR II traffic barrier can even be fitted in areas with limited headroom.
Improved cable routing and securing for the neatest installationEvery aspect of the Centurion SECTOR II has been designed to streamline installation and ensure that your access control system not only works hard, but looks good, too. Tie strap sockets have been provided on both the cabinet and the electronics tray, with cable routing down the front flange of the cabinet, resulting in an installation that's as neat and tidy as an officer in uniform.
Comprehensive input and outputWith our intuitive, user-friendly LCD interface, setting up the Centurion SECTOR is not just simple - it's child's play. Set the Centurion SECTOR to handle any vehicle access control application with the touch of a button. To make things even easier, our state of the art motor controller not only ensures smooth and reliable operation, it allows you to set your boom's opening and closing speed to your liking.
Onboard loop detector supportIf you'd like to fit an additional loop, simply clip a CENTURION loop detector into the convenient custom bracket, connect the loops and you're good to go! 11-pin loop detectors are also supported.
Operate wirelessly, thanks to CENTURION1Besides its code-hopping technology offering the highest level remote control security, this CENTURION onboard receiver is both multichannel and multi-user, allowing a multi-button remote to operate any combination of the system inputs, such as Barrier Raise, Barrier Lower, etc. It stores up to 500 transmitter buttons, and amongst other access control features, it provides the ability to selectively add and delete transmitter buttons saved into its memory.