This low-profile wheel is designed for heavy-duty use and boasts a high load capacity, making it perfect for various gate systems. Its compatibility with V-groove tracks, easy installation, and rust-resistant coating offer both convenience and durability. Upgrade your gate system with the confidence that comes from a tested and trusted solution. Unlock reliability and long-lasting performance with our 80mm V-Groove
Input Voltage | 90v - 240V AC +/- 10%, 50/60Hz 1 |
Motor Voltage | 12V DC |
Motor Power Supply | Battery-driven 2 1.8A Charger |
Push Force - Max | 250kgf |
Typical Gate Opening Time | V400 (short stroke) 14.3 sec / V500 (long stroke) 17.8 sec (V500) |
Duty Cycle - Mains Present | 50% 3 |
Daily Operations - Max | 250 |
Maximum Leaf Width for Corresponding Gate Mass (90° opening) 4 | V400 ,2.5m = 500kg <4m = 150kg V500 ,2.5m = 750kg <4m = 230kg |
Onboard Receiver Specification | CENTURION code-hopping, multichannel, 433MHz, Capacity - 65 transmitter buttons |
This Centurion D5 Evo Smart & D3 Smart Anti Theft Cage including fitted padlock has been designed specifically to fit the D5 Evo Smart & D3 Smart Gate Motors only.
Additional information pertaining to the Vantage Vx SMART Controller:
1. Limited by charger, ensure that load does not prevent battery from fully charging.
Continuous current draw should ideally be less than 500mA but must not exceed 1A.
2. Operators connected, no ancillaries fitted
Warnings and Limitations on the Vx SMART Controller:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Centurion Vantage Vx SMART Controller and Charger
1 x Vx SMART Wall Box
2 x Centurion Nova 4 Button Remotes
Cable VECTOR2 - 2 core X 2.0mm, 4 core X 0.5mm, Screened per 25m Roll
TECHNICAL SPECIFICATIONS | R6 SWING | |
---|---|---|
Input voltage | 90V - 240V AC 1 | |
Motor voltage | 12V DC | |
Current Consumption (mains) | ||
CP13E | 80mA (90V - 240V AC +/-10% @ 50Hz1) | |
CP84SM | 170mA (90V - 240V AC +/-10% @ 50Hz1) | |
Maximum DC Current Draw | 16A | |
Maximum Output Torque | ||
Standard-torque operator | 300Nm | |
High-torque operator | 390Nm | |
Power Supply3 | ||
Domestic | 0.8A CP13E, 7.2Ah Battery | |
Light-industrial | 1.8A CP84SM, 7.2Ah Battery | |
Industrial | 1.8A CP84SM, 33Ah Battery |
Maximum Daily Operations | Mains present | Back-up2 | |||
---|---|---|---|---|---|
Double Leaf | Single Leaf | Double Leaf | Single Leaf | ||
Domestic | 20 | 30 | 20 | 30 | |
Light-industrial | 250 | 250 | 40 | 60 | |
Industrial | 250 | 250 | 250 | 250 |
Maximum Daily Continuous Operations | Mains present | Mains present | |
---|---|---|---|
Double leaf | Single leaf | ||
Domestic | 20 | 30 | |
Light-industrial | 50 | 50 | |
Industrial | 100 | 100 |
SPECIFICATIONS CONTINUE | ||
---|---|---|
Typical Gate Operating Time: Standard-torque operator / High-torque operator | 12s / 15s | |
Mass of Motor Kit4 (excluding pedestal or wall bracket) | 15kg | |
Collision Sensitivity | Electronic - Adjustable | |
Temperature Range | -15°C to +50°C | |
Housing Protection | IP55 |
1: R6 Swing gate motor can operate off a solar supply, please consult Centurion Systems (Pty) Ltd for assistance.
2: These values are based on fully charged batteries, derate accordingly based on connected ancillaries.
3: Choose appropriate variation based on site requirements.
4: The weight of an operator kit (regardless of Master or Slave).
Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
Max Mass (Kg) | 500 | 500 | 480 | 330 | 240 | 185 | 145 | 120 | |
Allowable Wind Speed For 25% Clad (Km/h)1 | 114 | 84.7 | 67.3 | 56.9 | 49.2 | 43.2 | 38.6 | 34.8 | |
Allowable Wind Speed For 100% Clad (Km/h)1 | 57 | 42.4 | 33.6 | 28.5 | 24.6 | 21.6 | 19.3 | 17.4 |
Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
Max Mass (Kg) | 750 | 750 | 620 | 430 | 315 | 240 | 190 | 155 | |
Allowable Wind Speed For 25% Clad (Km/h)1 | 128.4 | 95 | 76.3 | 64.6 | 55.9 | 49.2 | 43.9 | 39.6 | |
Allowable Wind Speed For 100% Clad (Km/h)1 | 64.2 | 47.5 | 38.1 | 32.3 | 27.9 | 24.6 | 21.9 | 19.8 |
D10-SMART | D10 TURBO-SMART | ||
---|---|---|---|
Input voltage | 90V - 240V AC +/-10% @ 50Hz 1 | 90V - 240V AC +/-10% @ 50Hz1 | |
Current consumption (Mains) | 250mA | 250mA | |
Battery charger current output | 1.8A @ 27.4V +/-1% | 1.8A @ 27.4V +/-1% | |
Maximum number of operations per day | 750 3, 6 | 750 3, 6 | |
Duty cycle - Mains present2, 3 | 45% | 25% | |
Motor voltage | 24V DC | 24V DC | |
Motor power supply | Battery-driven (Standard Capacity - 2x 12V 7.2Ah) | Battery-driven (Standard Capacity - 2x 12V 7.2Ah) | |
Current consumption (motor at rated load) | 8A | 10A | |
Input / Output sink currents (Max accessory current draw) | |||
I/O 1-4 | 100mA (12/24V) | 100mA (12/24V) | |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse | 3A (12/24V) 10sec Pulse | |
Motor push force - starting | 40Kgf | 24Kgf | |
Motor push force - rated | 30Kgf | 18kgf | |
Gate mass - maximum | 1000Kg | 250kg8 | |
Gate length - maximum | 50m | 50m | |
Gate speed (varies with load)4 | Up to 26m/min4 | Up to 45m/min8 | |
Manual Override | Lockable with key release | Lockable with key release | |
Drive Pinion | 17T Module 4 | 20T Module 4 | |
Operations in standby with 2x 7Ah batteries | Power saving (15m/min 15kgf) Normal (26m/min 15kgf) | Power saving (15m/min 9kgf) Normal (45m/min 9kgf) | |
Half day2, 5, 6 | 118 | 63 | 189 | 130 | |
Full day2, 5, 6 | 93 | 50 | 150 | 104 | |
Collision Sensing | Electronic | Electronic | |
Operating temperature range | -15°C to +50°C | -15°C to +50°C | |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete | Code-hopping multichannel receiver with selective add and delete | |
Receiver code storage capacity | 1500 Remotes7 | 1500 Remotes7 | |
Receiver frequency | 433.92MHz | 433.92MHz | |
Degree of protection | IP54 | IP54 | |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | 13.5Kg | |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high | 350mm wide x 282mm deep x 470mm high |
The SECTOR II 4.5m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.
This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.
A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.
The Sector II 4.5m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.
This Kit Includes
Input voltage | 90V - 240V AC +/-10% @ 50Hz1 | |
Current consumption (Mains) | 250mA | |
Battery charger current output | 1.8A @ 27.4V +/-1% | |
Maximum number of operations per day | 750.2, 5 | |
Duty cycle - Mains present2, 3 | 45% | |
Motor voltage | 24V DC | |
Motor power supply | Battery-driven (Standard Capacity - 2x 7.2Ah)3 | |
Current consumption (motor at rated load) | 9A | |
Input / Output sink currents (Max accessory current draw) | ||
I/O 1-4 | 100mA (12/24V) | |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse | |
Motor push force - starting | 52kgf | |
Motor push force - rated | 39kgf | |
Gate mass - maximum | 2000kg | |
Gate length - maximum | 25m | |
Gate speed (varies with load)2, 5 | Up to 18m/min3 | |
Manual Override | Lockable lever with key release | |
Drive Pinion | 13T Module 4 | |
Operations in standby with 2x 7.2Ah batteries | Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) | |
Half day2, 3, 4 | 101 | 55 | |
Full day2, 3, 4 | 80 | 45 | |
Collision Sensing | Electronic | |
Operating temperature range | -15°C to +50°C | |
Onboard receiver type | CENTURION rolling code (Keeloq encryption) multichannel | |
Receiver code storage capacity | 1500 Remotes6 | |
Receiver frequency | 433.92MHz | |
Degree of protection | IP54 | |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
The SECTOR II 6m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.
This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.
A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.
The Sector II 6m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.
This Kit Includes
We use cookies to improve user experience, and analyze website traffic. For these reasons, we may share your site usage data with our analytics partners. By continuing to the site, you consent to store on your device all the technologies described in our cookie policy. Here is the the cookie policy