This low-profile wheel is designed for heavy-duty use and boasts a high load capacity, making it perfect for various gate systems. Its compatibility with V-groove tracks, easy installation, and rust-resistant coating offer both convenience and durability. Upgrade your gate system with the confidence that comes from a tested and trusted solution. Unlock reliability and long-lasting performance with our 80mm V-Groove
Input voltage | 90V - 240V AC +/-10% @ 50Hz1 | |
Current consumption (Mains) | 250mA | |
Battery charger current output | 1.8A @ 27.4V +/-1% | |
Maximum number of operations per day | 750.2, 5 | |
Duty cycle - Mains present2, 3 | 45% | |
Motor voltage | 24V DC | |
Motor power supply | Battery-driven (Standard Capacity - 2x 7.2Ah)3 | |
Current consumption (motor at rated load) | 9A | |
Input / Output sink currents (Max accessory current draw) | ||
I/O 1-4 | 100mA (12/24V) | |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse | |
Motor push force - starting | 52kgf | |
Motor push force - rated | 39kgf | |
Gate mass - maximum | 2000kg | |
Gate length - maximum | 25m | |
Gate speed (varies with load)2, 5 | Up to 18m/min3 | |
Manual Override | Lockable lever with key release | |
Drive Pinion | 13T Module 4 | |
Operations in standby with 2x 7.2Ah batteries | Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) | |
Half day2, 3, 4 | 101 | 55 | |
Full day2, 3, 4 | 80 | 45 | |
Collision Sensing | Electronic | |
Operating temperature range | -15°C to +50°C | |
Onboard receiver type | CENTURION rolling code (Keeloq encryption) multichannel | |
Receiver code storage capacity | 1500 Remotes6 | |
Receiver frequency | 433.92MHz | |
Degree of protection | IP54 | |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
VANTAGE 12V DC linear operator with Piston Drive, Colour Grey - Stroke 500mm V3.
Kit includes
Features
VANTG501V3
(Kit Includes : Operator, Controller, 12V Charger, (CP4C2) 7.2Ah Battery, 4m Steel Rack and 2 x 4 Button NOVA Txs. – Excludes Foundation Plate)
excludes Foundation Plate, Batteries & Rack
TECHNICAL SPECIFICATIONS | R6 SWING | |
---|---|---|
Input voltage | 90V - 240V AC 1 | |
Motor voltage | 12V DC | |
Current Consumption (mains) | ||
CP13E | 80mA (90V - 240V AC +/-10% @ 50Hz1) | |
CP84SM | 170mA (90V - 240V AC +/-10% @ 50Hz1) | |
Maximum DC Current Draw | 16A | |
Maximum Output Torque | ||
Standard-torque operator | 300Nm | |
High-torque operator | 390Nm | |
Power Supply3 | ||
Domestic | 0.8A CP13E, 7.2Ah Battery | |
Light-industrial | 1.8A CP84SM, 7.2Ah Battery | |
Industrial | 1.8A CP84SM, 33Ah Battery |
Maximum Daily Operations | Mains present | Back-up2 | |||
---|---|---|---|---|---|
Double Leaf | Single Leaf | Double Leaf | Single Leaf | ||
Domestic | 20 | 30 | 20 | 30 | |
Light-industrial | 250 | 250 | 40 | 60 | |
Industrial | 250 | 250 | 250 | 250 |
Maximum Daily Continuous Operations | Mains present | Mains present | |
---|---|---|---|
Double leaf | Single leaf | ||
Domestic | 20 | 30 | |
Light-industrial | 50 | 50 | |
Industrial | 100 | 100 |
SPECIFICATIONS CONTINUE | ||
---|---|---|
Typical Gate Operating Time: Standard-torque operator / High-torque operator | 12s / 15s | |
Mass of Motor Kit4 (excluding pedestal or wall bracket) | 15kg | |
Collision Sensitivity | Electronic - Adjustable | |
Temperature Range | -15°C to +50°C | |
Housing Protection | IP55 |
1: R6 Swing gate motor can operate off a solar supply, please consult Centurion Systems (Pty) Ltd for assistance.
2: These values are based on fully charged batteries, derate accordingly based on connected ancillaries.
3: Choose appropriate variation based on site requirements.
4: The weight of an operator kit (regardless of Master or Slave).
Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
Max Mass (Kg) | 500 | 500 | 480 | 330 | 240 | 185 | 145 | 120 | |
Allowable Wind Speed For 25% Clad (Km/h)1 | 114 | 84.7 | 67.3 | 56.9 | 49.2 | 43.2 | 38.6 | 34.8 | |
Allowable Wind Speed For 100% Clad (Km/h)1 | 57 | 42.4 | 33.6 | 28.5 | 24.6 | 21.6 | 19.3 | 17.4 |
Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
Max Mass (Kg) | 750 | 750 | 620 | 430 | 315 | 240 | 190 | 155 | |
Allowable Wind Speed For 25% Clad (Km/h)1 | 128.4 | 95 | 76.3 | 64.6 | 55.9 | 49.2 | 43.9 | 39.6 | |
Allowable Wind Speed For 100% Clad (Km/h)1 | 64.2 | 47.5 | 38.1 | 32.3 | 27.9 | 24.6 | 21.9 | 19.8 |
We use cookies to improve user experience, and analyze website traffic. For these reasons, we may share your site usage data with our analytics partners. By continuing to the site, you consent to store on your device all the technologies described in our cookie policy. Here is the the cookie policy